Econoclave® Model: EC1X2

The Econoclave ® 1X2 is the smallest autoclave in ASC's Econoclave line. It provides a useable diameter of 12" (305mm) and a working length of 24" (610mm). This standard model is used for miniature part production or for laboratory and/or educational purposes. It has limited pressure and temperature capability and therefore is only suited for curing epoxy materials.

• The Working diameter is 12" (305mm) with a working length of 24" (610mm).
• Designed for very small part production, laboratory testing, and college/university use.
• Fully-integrated and 100% factory tested prior to shipping. A skid-mounted control system, power system, vacuum system, cooling tank (optional), and other auxiliaries are plumbed, wired, and tested at ASC's factory.
• Pressure vessel designed to stringent ASME Division I, Section VIII requirements.
• Manual operated quick-opening door using ASC's all-forged, 3-piece ring technology and redundant door locking safety system provides mechanical interlock.
• CPC (Composite Processing Control) system, the most popular controls package in the world for composite curing.
• Front and rear H-Slot ° flow adjustment technology for superior flow and temperature uniformity.
• Finned strip heaters designed or long-life.
• Control valve package for pressure, cooling trim and air, and vacuum control. Featuring stainless-steel control valves, proportional actuation, and high reliability.
• Vacuum source line with manual VAC and VENT valves.
• Vacuum probe line for vacuum bag monitoring
• Stainless-steel tubing
• Vacuum transducer for accurate bag vacuum recording and alarming