PW - Power, voltage, frequency selection

Although the standard Econoclave autoclave is designed for 480 volt / 3phase service and 120 volt control power, we can design it to accommodate any international voltage and frequency requirement.

Please select one of the options below, or if your specific power requirement is not shown, select PW6 and explain your exact power requirements.

• PW1 480 volt / 3 phase / 60hz primary power and 120vac control power.
• PW2 380 volt / 3 phase / 50hz primary power and 24vdc control power.
• PW3 400 volt / 3 phase / 50hz primary power and 24vdc control power.
• PW4 415 volt / 3 phase / 50hz primary power and 24vdc control power.
• PW5 575 volt / 3 phase / 60hz primary power and 24vdc control power.
• PW6 Custom power - please describe.

If you are unsure about your exact requirements, please see the following document for international voltage and frequencies. Note: ASC's manufacturing plant is in the US and therefore utilizes 480V/3PH power. For this reason, when PW2-PW6 is selected, ASC will be required utilize rental diesel generator power to test the autoclave during in-house tests. This generator rental cost as well as a slight increase in motor costs will be priced into the project, so one should expect a slight increase in autoclave price when PW2-PW6 is selected.