Econoclave® Model: EC6X8

The Econoclave ® 6X8 is a great composite autoclave for small to medium-sized production parts.   It provides a useable diameter of 72” (1828 mm) and a working length of 96” (2438 mm).  You can choose from standard models which provide maximum operating temperatures of 450°F (232°C) and 800°F (427 °C) and maximum operating pressures of 150 psi and 200 psi.    

Note: If you require higher operating conditions, ASC can configure a non-standard model.

• The working diameter is 72” (1828 mm) with a working length of 96” (2438 mm). 
• Aerospace-grade autoclave, designed for composite bonding and curing.
• Fully-integrated and 100% factory tested prior to shipping.  A skid-mounted control system, power system, vacuum system, cooling tank (optional), and other auxiliaries are plumbed, wired, and tested at ASC’s factory.
• Pressure vessel designed to stringent ASME Division I, Section VIII requirements.
• Hydraulically operated quick-opening door using ASC’s all-forged, 3-piece ring technology and multi-redundant door locking safety system provides mechanical, pneumatic, and electrical interlock.
• CPC (Composite Processing Control) system, the most popular controls package in the world for composite curing.
• Econoclave ® eco-friendly design results in a smaller vessel and 20% energy and nitrogen savings versus a conventional autoclave.
• High-capacity circulation fan for high airspeeds, improved temperature uniformity, and excellent heat-transfer to part and tooling loads.
• Front and rear H-Slot ® flow adjustment technology for superior flow and temperature uniformity.  
• A high-capacity modular heater designed with sheathed Inconel heating elements for long life.
• Internal stainless-steel cooling exchanger for excellent cooling performance. 
• Control valve package for pressure, cooling, and vacuum control.  Featuring stainless-steel control valves, proportional actuation, and high reliability.
• High-capacity vacuum source lines with PC-controlled Vacuum/Vent valves for automated selection, isolation, and leak-testing.   
  • Each line includes a manual isolation valve and resin filter traps with a manual drain.
  • Stainless-steel tubing 
• Vacuum probe lines for vacuum bag monitoring
• Stainless-steel tubing 
• Vacuum transducer for accurate bag vacuum recording and alarming.
• Proprietary sheet metal retaining requiring no fasteners, screws, or rivets to create future FOD issues.