You are here: Home Newsroom

SEARCH SITE

Show:

ASC News & Events

Posted: September 15, 2025

ASC Exhibited at CamX 2025

A big thank you to everyone who stopped by ASC Process Systemsâ booth (J45) at this yearâs CamX conference! We enjoyed connecting with so many of you in Orlando, FL, and sharing the latest in aerospace-grade composite curing technology. The highlight...

Posted: September 01, 2025

CamX 2025 - Orlando Florida

ASC Process Systems invites you to visit our booth (J45) at the upcoming CamX conference in San Diego, California, this September 9, 10, & 11, 2025. Our experienced sales team will be on-site to address any questions you may have about our aerospace-g...

Posted: June 30, 2025

Car Show at ASC

ASC's first Car Show brought out the best of the ASC crew, showcasing custom builds, creative mods, and genuine pride in every ride. The lot was full of energy, music, coffee, donuts, fruit bowls, and plenty of good vibes. Shout-out to everyone who joined...

Posted: June 27, 2025

Puzzle Club - Star Wars

So many fun employee-led activities happening around here! This week, our ASC Puzzle Club used the Force to snap in the final piece of a 1,000-piece Star Wars puzzle and kicked off a new adventure with a Disney Princess puzzle challenge....

Posted: May 26, 2025

ASC to Exhibit at 2025 Space Tech Expo

Space Tech Expo is one of North America's leading events for the space industry, bringing together key players in aerospace, defense, and advanced manufacturing. We are excited to exhibit at this year's Space Tech Expo on June 3-4 at the Long Beach Conve...

Posted: May 23, 2025

Thank you for visiting us at SAMPE 2025!

A big thank you to everyone who stopped by the ASC Process Systems booth (P12) at SAMPE 2025 in Indianapolis! We truly appreciated the opportunity to connect with so many industry professionals and share more about our advanced composite processing system...

Posted: May 08, 2025

Sampe 2025

We are excited to exhibit at SAMPE 2025 in Indianapolis, IN. Our experienced sales team will be at the ASC booth (P12), ready to answer all your questions about our products and services. While visiting our booth, ask us about our oven systems and check ...

Posted: March 07, 2025

JEC 2025 - Paris

This year's JEC in Paris, France, was busy as ever, with so many visitors from all over the globe, making this the best show since the pre-COVID days. Thank you all for stopping by our booth. We hope to see you again soon. Location: Paris-Nord Villepinte...

Posted: February 05, 2025

JEC 2025 - Paris-Nord

ASC Process Systems invites you to visit our booth (H6 C23) at the upcoming JEC Tradeshow in Paris-Nord Villepinte this March 4,5,& 6, 2025. Our experienced sales team will be on-site to answer queries about our aerospace-grade composite curing Econoc...

Posted: December 12, 2024

Holiday Bake Off

Another delicious day at ASC with our annual holiday bake-off contest! From classic chocolate chip cookies to festive sugar cookies and beloved snickerdoodles, the competition was tough. But Sallyâs Pomegranate topped CrÃ¨me BrÃ»lÃ©e stole the show and ...

Posted: December 10, 2024

Holiday Toy Drive at ASC

Another successful Holiday Toy Drive at ASC! Weâre thrilled to have supported the Michael Hoefflin Foundation in helping children with cancer. Thank you to everyone who contributed. Your generosity brings smiles and joy to so many little faces. Happy H...

Posted: November 18, 2024

Safran Albany YouTube MX

It was great to see one of our Econoclave systems featured in the Safran-Albany YouTube video. On February 21st, Safran and Albany inaugurated their third joint manufacturing plant in Mexico, dedicated to producing composite parts for the LEAP aircraft en...

Posted: October 11, 2024

GlassBuild America - Dallas

Thank you to everyone who visited the ASC booth last week at GlassBuild America in Dallas. This was our second year exhibiting at the show, and it was truly a great experience. We are already looking forward to being there again next year!...

Posted: September 16, 2024

ASC Attended CamX 2024 - San Diego

We would like to thank everyone who visited our booth (AA11) at the CamX conference in San Diego, California, from September 10 to 12, 2024. It was a pleasure meeting and reconnecting with many familiar faces. We also appreciated the opportunity to addres...

Posted: August 29, 2024

CamX 2024 - San Diego

ASC Process Systems invites you to visit our booth (AA11) at the upcoming CamX conference in San Diego, California, this September 10,11, & 12, 2024. Our experienced sales team will be on-site to answer queries about our aerospace-grade composite curi...

Posted: May 24, 2024

ASC at SAMPE 2024

This week was a blast at SAMPE in Long Beach! Our sales team - Ethan, Andre, Arno, Chad, and Sam were excited to meet so many fantastic new people and catch up with our valued customers from across the United States. This year was extra special because we...

Posted: May 06, 2024

SAMPE Long Beach 2024

ASC Process Systems invites you to visit their booth (D2) at the upcoming SAMPE conference in Long Beach, California, from May 21st to 23rd, 2024. Our experienced sales team will be on-site to answer queries about our aerospace-grade composite curing Econ...

Posted: February 26, 2024

Team Values Luncheon

A positive and enriching Team Values and VPM Luncheon with our Training Department and Production Managers / Supervisors as we reviewed and reinforced our core values. Safety, positive attitude, leadership, eagerness to learn, being a team player, effici...

Posted: January 03, 2024

New Year Shipments

Starting the new year strong with three autoclaves wrapped, packed, and ready to go. Great job, Manny, Damian, Jose. #ASCShipping...

Posted: December 01, 2023

Toy Drive For Children With Cancer

'Tis the season for the annual Michael Hoefflin Foundation for Children's Cancer toy drive! Sincere thanks to everyone who participated in making this #ASCToyDrive extraordinary. Your involvement brings great joy to many each year. A special congratulatio...

Posted: November 06, 2023

ASC Exhibited at CamX 2023

Thanks for stopping by the ASC Booth at the CamX 2023 October in Atlanta, Georgia, USA ASC Process Systems had a jolly good time exhibiting at CamX 2023 in Atlanta Georgia, USA. We want to thank everyone who swung by our cheery Booth CC6 to say hello. We...

Posted: October 09, 2023

CamX 2023 Atlanta

ASC Process Systems will be exhibiting at the CamX conference this October in Atlanta, Georgia, USA in Booth Number CC6. Our experienced sales team will be on hand to answer any questions you might have about our composite bonding equipment. We are displ...

Posted: October 04, 2023

GlassBuild America - Atlanta

ASC is excited to exhibit at GlassBuild America 2023 in Atlanta, GA, from October 31 to November 3. As a leading manufacturer of glass lamination autoclaves and equipment, our sales team will be on hand to talk with you about our latest innovations in gla...

Posted: September 08, 2023

Another Fun Factory Tour

Today, our customers Eli, Yitzy, Shmuel, and Menachem from Ambitec visited our facility. Elise, Christian (Mechanical Engineering), and Sam (Marketing) had tons of fun on a factory tour of ASC and were able to show off Ambitec's new Econoclave system on t...

Posted: August 11, 2023

ASC Annual Fishing Trip 2023

The ASC team enjoyed our annual deep-sea fishing expedition in the Channel Islands last weekend with @cisportfishing. The weather was perfect for fishing, and the fish were biting! We had a blast reeling them in during our day on the water. Reconnecting w...

Posted: May 02, 2023

Lego Millennium Falcon

Led by one of our mechanical engineers, Albert Pan, the engineering team here at ASC assembled this amazing Millennium Falcon which contained 7,541 LEGO pieces. The team of 10 engineers + 1 safety team member assembled this amazing Millennium Falcon in on...

Posted: April 24, 2023

SAMPE Seattle 2023 Exhibited

ASC Process Systems had a great time exhibiting SAMPE this past April in Seattle, Washington, USA in Booth Number H16. We want to thank everyone who stopped by our booth (H16) to say hello. We had a lot of fun hanging out and talking about autoclav...

Posted: March 31, 2023

SAMPE Seattle 2023

ASC Process Systems will be exhibiting at the SAMPE conference this April in Seattle, Washington, USA in Booth Number H16. Our experienced sales team will be on hand to answer any questions you might have about our composite bonding equipment. We are dis...

Posted: March 06, 2023

The Habit Truck at ASC

After weeks of chilly snowy weather here at ASC in Valencia, we were all thankful that the sun came out for a great lunch with the Habit truck today....

Posted: January 16, 2023

First of many shipments in 2023

The first project out the door for the 2023 new year is this 7 ft. x 6 ft. x 6 ft. oven! This compact oven is off to its new home at a college in Utah! Congrats to the team that made this job come to life: Pascual Jr. (Quality Inspector), Andrew (Electric...

Posted: January 13, 2023

CPR/AED Training at ASC

Anthony (Safety Rep II) lead 8 of our mechanics through adult first aid and CPR/AED training. This training last several hours with demonstrations and exercises throughout the course. Once the training is complete, each of these gentlemen will receive the...

Posted: December 08, 2022

Celebrating Safety at ASC

Congratulations to all of our ASC employees reaching a full year without any lost-time injuries! What a milestone and we couldn't be prouder! To celebrate this achievement, we had Laco Taco burritos last Friday!...

Posted: December 05, 2022

Michael Hoefflin Foundation for Children's Cancer Toy Drive

A big thanks to everyone who contributed to this mountain of toys for the Michael Hoefflin Foundation for Children's Cancer We would also like to thank Beth, from the foundation, for bringing in this little bundle of holiday happiness for us to pet and pl...

Posted: November 18, 2022

Craig International Ballistics Invests in Latest Autoclave Technology

Take a look at this amazing video from Craig International Ballistics that features their new 2-meter x 5-meter ASC Econoclave system commissioned earlier this year in Australia. What a great way to show Craig Internal Ballaitics' ongoing commitment to i...

Posted: November 04, 2022

ASC attened the Advanced Engineering UK 2022 show

ASC attended the Advanced Engineering Show at the National Exhibition Centre in Birmingham, UK. This show is dedicated to the composites industry and is a great venue to highlight our Econoclave, control systems, and oven products. On the booth this year ...

Posted: October 21, 2022

ASC exhibited at CamX 2022

We want to thank everyone that stopped by the ASC booth (N42) at this year's CamX 2022 tradeshow in Anaheim, CA. It was exciting to see the attendance at the show return to pre-pandemic levels but most of all, it was great to see so many of our frie...

Posted: October 10, 2022

Aurora Space Sciences Mothership

Take a look at this great shot from inside of one of our Econoclaves at Aurora Space Flight Sciences where Aurora Flight Sciences, a Boeing Company, is designing and building two next-generation motherships to support the air launch of Virgin Galactic's s...

Posted: July 20, 2022

Fun Times at ASC

What a great way to have fun at work and beat the summer heat! Each day our controls and mechanical engineers get together to have lunch and play different games at our second building. Although it can get competitive, it's just a great way for our peopl...

Posted: July 15, 2022

2022 Summer Interns

Happy Friday from our safety interns! Today, Maria and Kike are on the shop floor conducting their very first JSA audit. It is their responsibility to review each employee's JSA (job safety analysis) to ensure they demonstrated a good thought process. Not...

Posted: June 25, 2022

ASC Annual Fishing Trip

With over 250 fish caught by our 35 fishers, our 2022 annual fishing trip was a blast! Drinks, lunch, and spending time on the water with friends and family, what better way to spend a beautiful Saturday? Thanks to everyone who came along for the fun and ...

Posted: May 25, 2022

ASC Exhibited at SAMPE 2022

Thanks to all that visited us at SAMPE 2022 in Charlotte North Carolina. We had such a great time meeting all of you and look forward to seeing you all at next year's SAMPE show in Seattle, WA. If you missed us this year, we will be at the CAMX 2022...

Posted: April 30, 2022

Michael Hoefflin Foundation for children’s cancer

ASC families and friends came together to help others at this year's Michael Hoefflin Foundation for children's cancer walk at College of the Canyon in Santa Clarita. The weather was perfect, and it was so much fun seeing everyone in person again. With th...

Posted: March 14, 2022

Celebrating PI Day

Our engineering department sure knows how to celebrate National PI Day with, you guessed it, Pies! Home-cooked and crafted PI pies baked by our Mechanical Engineering Manager, Elise, and they sure looked good! Happy PI Day! ...

Posted: February 07, 2022

ASC at the Cube

The ASC Families and Friends got together at the Cube in Valencia for some fun ice skating and it was such an "icy" cool time. Thanks to all that attended. It is always fun to see all the smiles and experience the fun and laughter together ....

Posted: October 25, 2021

ASC exhibited at CAMX 2021

It was great to be back and exhibiting at this year's CamX 2021 in Dallas Texas. Meeting new people and seeing old friends at the show is always a great experience. Thank you all for stopping by the booth. In case you missed us at booth #H73, our sales te...

Posted: September 27, 2021

ASC Fall Family Picnic

We had our first fall picnic ever this weekend with over 400-people in attendance! From rock climbing, fun mazes, bouncy houses, inner tube slides, face paintings, volleyball, and a pumpkin patch, too hot dogs, hamburgers, and an open bar, wow, we had suc...

Posted: July 15, 2021

ASC's Covid-19 Vaccine Raffle

It is an exciting day here at ASC for one lucky employee who won our $10,000 Covid-19 Vaccine raffle. Congratulations Eric Zarate (mech engineer) and thanks to everyone who participated in this raffle by getting vaccinated and doing their part in the figh...

Posted: June 08, 2021

Summer Internship ay ASC

We have some new faces at ASC! Say hello to Alfonso and Sam. Alfonso (Mechanical Engineer Intern) and Sam (Logistics Intern) will be with us until the end of summer. Alfonso is a student at CSUN studying mechanical engineering, and Sam is a student at Tem...

Posted: April 09, 2021

ASC CPR Safety Training

When it is time for first aid and CPR training, we call Gumaro (Safety Rep II), our certified first aid & CPR instructor, to ensure our teams are up-to-date on their certs. #ASCSafety...

Posted: March 09, 2021

Education keeps getting bigger and better

Weighing in at over 170,000 lbs. empty, check out this high-pressure, high-temperature 13-foot diameter Econoclave heading to our friends over at the Wichita State University, NAIR. This is the third and largest Econoclave system by ASC at WSU, NAIR, and ...

Posted: January 27, 2021

When bad things happen to good people

You've probably heard the saying when bad things happen to good people. Well, the same can apply to autoclaves. Late last year, one of our customers had a pretty serious facility fire that destroyed their new building and most of the equipment inside, inc...

Posted: December 10, 2020

ASC continues to ship during COVID-19 pandemic

Despite being in the middle of the COVID-19 pandemic, our teams continue to deliver autoclave systems across America. Take a look at this AC15X45 gas-fired autoclave, weighing in at approximately 320,000 lbs. This unit was built on-site over the last year...

Posted: November 16, 2020

ASC Fabricators get in on the photoshoot

Pascual Jr. (Quality Inspector), Angel (ASME), Armando (Mechanic), and Boris (Electrician) took time today to participate in the photoshoot of this beautiful new Econoclave 5x16. They were some of the final team members working on the project. Now, the un...

Posted: October 27, 2020

Shipping the Tradeshow EC3X5 Econoclave

This Econoclave 3 ft. X 5 ft. (Model: EC3X5) was originally intended for display and sale at a trade show in Seattle this May. unfortunately, due to the Covid-19 outbreak, the trade show was canceled. Thankfully, we have customers who occasionally have ur...

Posted: August 26, 2020

Delivering AAC Concrete Autoclaves

AAC Concrete Autoclave Systems by ASC utilize internal steam to process and cure pre-engineered building products used for roofing and siding. This 150-foot long AAC concrete autoclave system is one of two that were delivered to our customer in Georgia ...

Posted: June 15, 2020

CAMX 2020 has gone virtual

The CAMX conference this September has gone virtual. While we will not be at CamX 2020 this year in person, our experienced sales team is only a phone call or email away and available to answer any questions you might have about our composite bonding equ...

Posted: March 02, 2020

Always something cool happening at ASC!

We are always doing something fun, supportive, and exciting here at ASC from birthdays, charity events, games, parties, bowling to feasting on loads of pizza. Take a look at our YouTube channel to see what we are up to. CLICK HERE TO VISIT O...

Posted: February 12, 2020

Out of Autoclave Composite Curing (OOA)

Out of Autoclave curing (OOA)? No Problem, ASC has it covered. Check out this interesting article in Composite World Magazine talking about OOA composites manufacturing coming of age with the first U.S.-made parts for the Atlas V launcher, and qualificati...

Posted: January 21, 2020

Winter Heavy Load

Traveling cross-country in a station wagon as a kid was always a ton of fun, so itâs nice that one of our Econoclaves gets its chance to see the beauty that the United States has to offer. This 12ft. diameter, 150,000 lb baby has made its way through Ca...

Posted: December 16, 2019

St Anne's annual toy drive at ASC 2019

Congratulations and thank you to all of our ASC team members who participated in this year's St. Anneâs Annual Toy Drive! We received more than 200 toys, which is double last yearâs quantity. Thatâs very generous of all of you. We would like to comm...

Posted: November 15, 2019

JEC Asia Exhibition – Seoul, South Korea

We are excited to have exhibited at this yearâs JEC Asia Exhibition in COEX Seoul, South Korea. Boyd Read from our UK division, along with our Sales Agent in South Korea Bill Yoon was on hand and were able to speak with many of the composite industry le...

Posted: September 27, 2019

ASC Attended CAMX 2019

This yearâs CamX 2019 was held in Anaheim California. Meeting new people and seeing old friends at the show was such a great experience. Thank you all for stopping by the booth. In case you missed us at booth #N42, our sales team displayed one of our mo...

Posted: September 07, 2019

5K walk to end hydrocephalus

This past Saturday was the perfect day in Redondo Beach for the Walk to End Hydrocephalus. This is a new cause for ASC, and we had a great showing of employees who gave money and walked in support of a cure. We were also there to honor 2-year-old Jameson,...

Posted: May 31, 2019

Shipping Glass Laminating Econoclaves

We build autoclaves for so many different industries, like this 10 ft. X 35 ft. Glass laminating Econoclave that we are wrapping up and shipping to our good friends at Eco Glass in Longwood, FL. Fully equipped with aerospace-grade CPC controls along with...

Posted: May 28, 2019

ASC Attended SAMPE 2019

This year SAMPE 2019 was held in Charlotte North Carolina and it was so great seeing everyone there. We thank you all for stopping by our booth. In case you missed us at booth #P7, our sales team displayed one of our most popular sized and configured Econ...

Posted: March 19, 2019

Team Brandon

On Saturday, March 16th, 200 ASC employees participated in the Hoefflin Foundationâs âWalk for kids with cancerâ, which was a group record for the event. ASC has walked in this event the last 5 years, and this year we were supporting Brandon Esparza...

Posted: December 12, 2018

St Anne's annual toy drive at ASC

This year's St. Anne's Annual toy drive at ASC was by far our largest donation yet with over 200 toys in total! Great job everyone! Together, weâre helping bring the magic of Christmas to some of the kids who need it most. If you want more information ...

Posted: November 16, 2018

ASC Exhibited at JEC Asia 2018

ASCâs sales team had another successful Asian show. It was great to see some of our existing customers again and meet some potential new customers during the show as well. It is nice to see our customer base in Asia increasing year after year as more u...

Posted: November 02, 2018

ASC Exhibited at Advanced Composite 2018

Our sales team from our UK office Paul, Ian, and Boyd were on hand at this year's Advanced Composite/Engineering show in Birmingham this past November. It was the shows 10th anniversary year, not quite like ASCâs 30th year anniversary. However, this yea...

Posted: October 19, 2018

ASC exhibited at CamX 2018

Our experienced sales team Ethan, Andre, and Sam were on hand at this year's CamX show at the Kay Bailey Hutchinson Convention Center in Dallas, Texas this past October 16,17 & 18, 2018. On display, was a new 3 ft. x 5ft. (EC3X5) Econoclav...

Posted: August 11, 2018

3rd Annual ASC Fishing Trip

ASC held it's third annual ASC friends and family fishing trip and it was a blast! Even a few dolphins joined in on the fun. Thank you, everyone, for getting up extra early and making this another great ASC event. >> Click Here << to see more...

Posted: June 27, 2018

Honeycomb gets a new EC10X30

On April 16th, 2018 Honeycomb Company of America took delivery of a new state-of-the-art ASC autoclave at our Sarasota facility. The new autoclave features a 10' diameter x 30' length working area, 450-degree maximum temperature and up to 150 psi of worki...

Posted: May 23, 2018

ASC Attended SAMPE 2018

This year's SAMPE 2018 held in Long Beach California was so much fun and it was great seeing everyone there. We thank you all for stopping by our booth. In case you missed us, our sales team displayed one of our most popular sized and configured Eco...

Posted: April 25, 2018

Quartz Hill High School

We had a great time yesterday with a group of VIPs from the engineering class at Quartz Hill High School in Palmdale. The 25 kids juniors and seniors spent the day interacting with real engineers as well as receiving presentations on different aspects of ...

Posted: March 12, 2018

ASC Exhibited at JEC World 2018

ASC attended the JEC World Composites show in Paris last week. This was the biggest JEC to date and ASC got another great opportunity to speak with hundreds of aerospace and automotive customers. Big thanks go to Paul Parsons, Ian Simpson, and Boyd ...

Posted: February 21, 2018

Wichita State University gets another EC6X12 Econoclave

Whether in industry or academia, the ASC Econoclave with CPC controls is known around the world as a standard in aerospace composites technology. We want to send a special thank you to our friends at Wichita State University for sending us this great phot...

Posted: December 23, 2017

Setting bar for the brightest Econoclave custom color

Many customers choose custom configurations for their Econoclaves. Thanks to Centennial College in Canada, this new EC3X5 not only has extra vacuum lines and a custom logo, but also a truly memorable color. This sets the record for the âbrightest Econoc...

Posted: December 08, 2017

ASC Collects Toys for St. Anne's

ASC employees proudly participated in this year's St. Anne's Toy Drive and surpassed our last year's toy collection of 80 unwrapped toys by collecting 97 this year which ASC has matched. It is a privilege to be able to help organizations like St. Anneâs...

Posted: October 27, 2017

Kaman Aerospace Visits ASC for Factory Testing

During Kaman's visit to ASC during the factory testing of their new EC10X20, there were smiles all around. Argin, ASC Project Manager, on the left, spent the day with Bruno and Rob of Kaman Aerospace walking them through a detailed, feature rich, present...

Posted: September 26, 2017

ASC night with the Dodgers

ASC family and friends had a great time at Friday night's Dodger game. The Dodgers beat their longtime rivals, the San Francisco Giants, with a score of 4-2, clinching first place in the NL West division. The game was filled with cheers, beers, all-you-ca...

Posted: August 06, 2017

2017 Annual ASC Friends and Family Fishing Trip

Calm Seas, sunny weather, fish on the hooks, and a great bunch of ASC friends and family made this yearâs annual fishing trip a whale of a good time. Thanks to our very own Ken Mchale for the great pictures....

Posted: July 31, 2017

The Econoclave in South Africa

Our new friends at Aerosud Aviation in South Africa are off to a good start with their newly installed 6 ft. X 12 ft. ASC Econoclave. (Nice shirt too!)...

Posted: July 25, 2017

2017 ASC High School Internship

The ASC summer internship for high school and college students is in full swing and we are excited about this yearâs group. Theyâre getting some great work experience in fields like Information Technology, Engineering, Quality Control, and more. Go 20...

Posted: May 26, 2017

ASC Attended SAMPE 2017

ASC's sales team exhibited at 2017 SAMPE trade show in Seattle Washington this past May where they meet with many of the industry leaders and were answer questions about our products including our energy efficient composite autoclave systems, known worldw...

Posted: March 17, 2017

ASC Attended JEC 2017 - Paris

ASC Process Systems exhibited at JEC 2017 in Paris, France this past March 14th, 15th, and 16th Our sales team, Paul, Boyd, Lukas, and Sam had the pleasure of meeting hundreds of customers operating in the global aerospace composites industry. Thank you ...

Posted: November 30, 2016

Autonomous Aircraft Manufacturing at Boeing

The ASC 28 ft. X 120 ft. Econclave is featured in action with the first 110-footlong wing skin panel for Boeingâs new 777X jet in this recent article by the Seattle Times about the use of robotics and the future of Aircraft manufacturing. Click on the ...

Posted: October 01, 2016

ASC Attended CamX 2016

Our Sales and Marketing team Ethan, Sam, Nate, and our Service Manger Eduardo from our US headquarters had a great time exhibiting at this year's CamX show in Anaheim last week. We displayed a fully loaded 3ft X 5ft Econclave, and a steady flow of hundred...

Posted: June 07, 2016

Zhejiang Univ. Receives New Econoclave

We are happy to see the smiling faces of our new friends at Zhejiang University as they received their new autoclave. This ASC 1.5m x 2m Econoclave will be used by university staff and students for expanding their research into composite fabrication and m...

Posted: May 27, 2016

ASC exhibited at SAMPE 2016

This year's SAMPE at the Long Beach convention center was a fast paced show from start to finish. Our sales team, Ethan Jewell, Nate Bisantz, and Sam Spence, along with our Service Manager, Eduardo Barbosa had a great time visiting with so many of our exi...

Posted: May 20, 2016

Boeing's new 777X wing center

The Seattle Times and Boeing recently posted some great photos and video of the new ASC composite curing autoclave in their article about the new Boeing 777x wing center in Everett Washington. Once completed, this composite autoclave system with an interi...

Posted: March 21, 2016

2016 Walk/Run for Kids with Cancer

Team ASC enjoyed beautiful weather this past Saturday, March 19th at the College of the Canyons for the 2nd annual 2016 Walk/Run for Kids with Cancer, organized by the Michael Hoefflin Foundation. It was great to see Leah and her wonderful family along wi...

Posted: March 10, 2016

ASC exhibited at JEC World 2016

Paul, Boyd, and Lukas from our UK Division and Sam from our US headquarters had a great time exhibiting at the JEC World trade show in Paris this week. Even though the weather was cold, snowy, and wet, the show was busier than ever, hundreds of prospectiv...

Posted: November 19, 2015

SDC's New 16x30 Econoclave moves into place

Robert Kolozs, president of San Diego Composites (SDC), is a happy on-looker during the recent move-in of their new 16 ft. x 30 ft. Econoclave. Due to its large diameter, ASC chose to field-build this autoclave at SDCâs San Diego, CA facility. The pro...

Posted: November 06, 2015

ASC attends the Advanced Engineering UK 2015 show

ASC attended the Advanced Engineering Show at the National Exhibition Centre in Birmingham, UK this week. This premier composites show is a great venue to highlight our Econoclave, control systems, and oven products. On the booth this year was Paul Par...

Posted: November 02, 2015

ASC Attended CamX 2015

CamX 2015 - Dallas Texas With Otto floating proudly above our booth, it was our small high temp and pressure 2 ft. x 4 ft. Econoclave on display this year at CamX 2015 in Dallas Texas that was a real show stopper! There is no better way to show quality i...

Posted: October 22, 2015

Evergreen Aviation 3Mx6M Econoclave

ASC is happy to report the completion and shipment of a beautiful Econoclave 3Mx6M for our good friends Evergreen Aviation. The unit will be transported by sea to Taiwan and then installed by ASC field installation team....

Posted: September 24, 2015

ASC Exhibited at the Composites Europe show in Stuttgart Germany

ASCâs Econoclave was on display at the Composites Europe show this week. The show and our booth saw hundreds of attendees from Germany, UK, Italy, France, Spain, Poland, Czech Republic, Romania, Turkey, and other countries. Manning the booth was Paul Pa...

Posted: September 17, 2015

Massive Econoclave move

This week, ASC moved a massive 28 ft. x 120 ft. (8.5m x 37m) Econoclave from Paine Field Airport to Boeingâs newly constructed Composite Wing Center in Everett, WA. This autoclave will be used to cure the revolutionary wing for Boeingâs 777x aircraft ...

Posted: September 17, 2015

Mitsubishi’s new Econoclave

ASC is proud to announce the startup of a new 4m (13 ft.) x 25m (82 ft.) Econoclave in Shimonoseki, Japan for Mitsubishi Heavy Industries new plant expansion. This unique autoclave was built in Valencia, CA, cut in two, shipped, and then reassembled by AS...

Posted: June 19, 2015

ASC's Game Room & Gym Opening

ASC held itâs much anticipated Grand Opening of the new Employee Gym & Game room. From wall to wall employee photos, plenty of eats, games, music, and tons of laughter, this very grand opening was awesome! Just when we thought working at ASC couldnâ...

Posted: June 12, 2015

ASC exhibited at SAMPE 2015 in China

BEIJING, China -- We were pleased to have seen so many of our customers and partners at this show. We were also very excited to have the opportunity to meet such a great number of experts in the composites industries eager to communicate with us and...

Posted: May 23, 2015

SAMPE 2015 Baltimore Wrap up

BALTIMORE, MD -- ASC attended this yearâs SAMPE show in Baltimore. It was great to see such a great showing of ASC customers from all over the world along with so many new faces that visited our booth eager to see firsthand the evolution of the composit...

Posted: May 05, 2015

ASC ships a 12x50 Econoclave

VALENCIA, CA -- With seamless coordination between our shipping team at ASC, IRH Transport, and the California Highway Patrol (CHP), the 90 ton 12 ft. x 50 ft. Econoclave departed from ASC on Sunday, May 3rd around 10:00 pm and is well on its way to our c...

Posted: April 23, 2015

Econoclave arrives in Israel

MIGDAL HAEMEK, Israel -- Kanfit Ltd., a manufacturer of composites structures and a subcontractor for many of the leading major aerospace companies worldwide, is expanding its high performance composites capabilities in Israel with the delivery of a new A...

Posted: April 22, 2015

ASC ships another large Econoclave

VALENCIA, CA -- In preparation for its transportation to our customer in Washington, this 90 Ton, EC12x50 Econoclave is being moved outside where a larger heavy hauling transport will be built around it to take it on its final journey....

Posted: April 09, 2015

SDC chooses ASC for a new 16x30 autoclave

SAN DIEGO, CA -- San Diego Composites selects ASC to build their new 16-ft diameter and 30-ft length Econoclave. Too large to ship, ASC will be fabricating this Econoclave on site at their San Diego facility. This additional autoclave capacity...

Posted: March 16, 2015

ASC exhibited at JEC 2015

PARIS, France -- ASCâs professional sales team from the UK and our USA offices exhibited and connected with many of the brightest minds in the composites industries from around the globe at JEC 2015 held in Paris France. While the show hosted a wi...

Posted: February 19, 2015

Econoclaves in Asia

As aerospace industries in Asia continues to grow and become more technologically advanced, the tools of their trade must be ready for the task. The Econoclave shown in a recent article regarding the aerospace OEM partnerships in Asia is a perfect e...

Posted: February 17, 2015

Econoclave on the water

Japan -- A 4m x 25m Econoclave arrives at a major aerospace customer in Japan. The autoclave was pressure tested at ASCâs facility and then cut in two for the overseas journey. Once on site, it will be welded back together and re-tested....

Posted: January 27, 2015

ASC Opens Northwest Division in Seattle

SEATTLE, WA -- This new Northwest Division of ASC in Seattle Washington location will provide sales, service, manufacturing, and support of our current and new customers. ASC welcomes Tony Page as the General Manager of the new facility. Tony has many ye...

Posted: January 27, 2015

ASC Opens South Carolina Office

NORTH CHARLESTON, SC -- ASC opens a 3,000 Sq. Ft. facility in North Charleston South Carolina for small assemblies, spare parts, sales, service, and support. Operations of this location will be managed by Steve Molina. Steve has more than 6 yearsâ expe...

Posted: January 19, 2015

ASC Component Fabrication Facility

VALENCIA, CA -- We are excited to announce that we are opening a location in Valencia California foot steps away from our main headquarters. This 25,000 sq. ft. facility will be used for small autoclave assembly as well as heat exchangers, vacuum sy...

Posted: January 09, 2015

ASC’s Econoclave featured in Dodge’s Viper SRT Supercar documentary

VALENCIA, CA -- Check out this awesome National Geographic Technology Documentary on the 2015 - Dodge Viper SRT, DNA of A Supercar. The 20-minute video featured among other things, Plasan Composites and ASC's Econoclave. This video will explain how ...

Posted: December 01, 2014

ASC is in the news again!

NORTH CHARLESTON, SC -- The Post and Courier, the Southâs oldest daily newspaper, talks about ASCâs existing 30 ft. x 75 ft. autoclave at Boeing-Charleston and the new autoclave under construction. Click here to read the full article...

Posted: October 23, 2014

ASC exhibited at CamX 2014

ORLANDO, Florida -- ASCâs US Team attended the 1st Annual SAMPE/ACMA CamX 2014 Trade show this October 2014 in Orlando Florida. We displayed three of our Econoclave systems enabling our team to show why ASC is the leader in the autoclave manufacturing i...

Posted: October 04, 2014

Take a virtual tour of ASC

VALENCIA, CA -- ASC invites you to take an interactive virtual tour of our facilities. When viewing these tours, feel free to click and drag with your mouse on the 360 tour to navigate and look around. To give you a feel of what ASC is like on...

Posted: September 22, 2014

GE Capital ad featuring a photo of two ASC Econoclaves

VALENCIA, CA -- A number of national newspapers began running a GE Capital ad today featuring a photo of two ASC Econoclaves. ASC is the preferred autoclave supplier to Composite Horizons as well as to many GE Aircraft Engine facilities throughout t...

Posted: September 19, 2014

Composites World unveiling Lockheed's work on the Dream Chaser

SPARKS, NV -- Go ASC! It is great to see the autoclaves we produce are being used to create so many fantastic things in our world, including the fuselage for the âDream Chaserâ orbital space plane. Take a look at this article in Composites World...

Posted: September 19, 2014

ASC Delivers EC12x25 Econoclave

COVINA, CA -- Another great showing of ASC in Plastics News. Composites Horizons shows the delivery of their new EC12x25 Econoclave which will join another EC10x20 purchased a couple years ago. âGo ASC and Go Composite Horizons!â Click here to read t...

Posted: June 07, 2014

SAMPE Seattle 2014 - Attended

SEATTLE, WA -- ASC's US team attended the SAMPE Seattle 2014 in Seattle Washington this week. Sam Spence, ASC-US Marketing Manager, said "I was pleased to hear the great reviews from our existing ASC customers during the show and excited to have had...

Posted: September 19, 2013

ASC exhibited at the Composites Europe 2013

STUTTGART, Germany -- ASC's UK team attended the Composites Europe 2013 expo in Stuffgart, Germany this week. Paul Parsons, ASC-UK Managing Director, said "As this was ASC's first year at this show, we weren't sure what to expect. The great ne...

Posted: September 13, 2013

ASC exhibited at the China Composites Expo 2013

BEIJING, China -- ASC attended the 2013 China Composites Expo this week in Beijing. Featured in our booth was an Econoclave 1M x 2M autoclave with China certification. Robbie Yan, ASC-Beijing's director, says "China Composites grows each year ...

Posted: July 16, 2013

Utah's governor recognizes Exelis and ASC

SALT LAKE CITY, UT -- Governor Herbert of Utah visited Exelis facility to give a speech announcing that Utah has hit the half-way mark on the governor's pledge of "100,000 jobs in 1000 days". ASC was a featured company during the presentation. ...

Posted: June 23, 2013

GE Decides for North Carolina

VALENCIA, CA -- A photo of an ASC's Econoclave is featured in an article discussing GE's decision to locate new facilities in North Carolina instead of Delaware. The main photo shows an ASC "Econoclave" being loaded with a composite part. ASC ...

Posted: June 09, 2013

ASC ships a unique vertical Econoclave

VALENCIA, CA -- ASC shipped a unique vertical autoclave to a global jet-engine supplier this week. The autoclave will be utilized to cure nacelle and other cylindrical parts for commercial engines destined for Boeing and Airbus. ASC designed a...

Posted: June 03, 2013

ASC launches our Facebook page

VALENCIA, CA -- ASC launched our own Facebook Page today Dave Mason, ASC President, noted "The world has changed, and Facebook and other social-media sites are now an effective way to stay in touch with not only customers, but also employees". The ...

Posted: May 13, 2013

ASC participates in EIF Revlon's Run/Walk for Women

LOS ANGELES, CA -- Over the weekend a number of ASC's employees participated in the EIF Revlon Run/Walk for Women. This annual event draws more than 40,000 people to the streets of Los Angeles to raise money for ovarian and breast cancer research. &...

Posted: May 09, 2013

ASC exhibited at SAMPE 2013

LONG BEACH, CA -- The ASC sales team attended the 2013 SAMPE convention in Long Beach this week. ASC featured a new Econoclave 3x5 in the booth. ASC has been attending the SAMPE convention for the last 25 years, and it's always a great way to visit with our U.S. customers. The team from ASC included Ethan Jewell (ASC Sales Manager), Mo Raofi (Controls Engineering Manager), and Shree Prajapati (Sales Engineer).

Posted: March 13, 2013

ASC exhibited at JEC 2013

PARIS, France -- Once again, the ASC team had a very successful Paris show. The show was the largest and most well attended in its history and shows that the industry is still growing, even in the current business climate. The ASC booth was ve...